Beta 3.974Design your stand
Korg Volca Sample OK GO Edition stand with gear Customize and Print!

About this stand

This 3D-printable stand is sized around the listed 193 × 115 × 45 mm dimensions for the Korg Volca Sample OK GO Edition. It raises and angles the device for a clearer view of its panel and controls while keeping the design tied to the device’s footprint.

Choose a viewing angle and support structure on this page to compare the available StandSynth layouts. The filament estimate updates with the selected design, and the editor lets you continue customizing colors, structural options and printable parts before export.

The printable files are free to download. If you are combining this device with other gear, the related stands and multi-device ideas below provide starting points for stacked or side-by-side setups.

Before committing to a full print, check your printer’s dimensional accuracy, review the generated parts and confirm that the stand leaves room for the cables you plan to use.

Before you print

  • Please verify manually that the stand leaves room for the cables you plan to use before printing.
  • Confirm that the selected printer bed matches your printer, and re-export if it does not.
  • Review every part in Print Plates view, then check plate orientation and any supports recommended by your slicer.
  • For multicolor prints, make sure the purge tower does not overlap a stand part and leaves enough room on the build plate.
  • Print the relevant calibration test first whenever a joint or fit clearance is critical.
  • Use more walls or infill for heavier gear or demanding setups; lower infill may suit lighter-duty stands.
  • Confirm bed adhesion, material temperatures and first-layer quality before starting a long print.
  • Adhesive rubber feet can help keep the stand and gear in place.

Related stands

Other devices from Korg, multi-device setups that include this gear or brand, and genuinely related stands.

Got a larger setup? Start here

Ready-made starting points you can open and edit.